Junction Boxes Anode Junction Boxes Cathodic protection junction boxes are designed to provide a termination point for multiple anode cables before routing to a cathodic protection rectifier. In the junction box, anode cables are normally routed through current measurement shunts and terminated on a common copper buss bar. A single positive cable is then routed directly to the cathodic protection rectifier.

Junction Box 1 The anode junction boxes are available with or without support frame assembly, conduits and scrape pipe to direct burial.

Bond Boxes

Bond Boxes

Cathodic protection bond boxes are designed to provide a location for the purpose of cathodically interconnecting multiple structures, bond boxes are custom made for specific applications and requirements. The bond boxes are available with or without support frame assembly, conduits and scrape pipe to direct burial.

Cathodic protection multipurpose junction boxes are designed to provide flexibility to user to connect different type of structure / equipments. Some of uses are as follows;

• Used as a negative connection junction box
• Used as a drain point junction box
• Used as a reference electrode junction box
• Used as a direct bond junction box
• Used as a test station
• Used as a anode junction box
• Used as a cable splice junction box

Multipurpose junction boxes are custom made and usually consist of an enclosure, a nonmetallic mounting panel and components such as current measurement shunts, variable resistors, cable lug, chamber cable, etc.

The multipurpose junction boxes are available with or without support frame assembly, conduits and scrape pipe to direct burial.



AFIC has a wide range of test stations not limited to solely measuring cathodic protection potentials only. AFIC is capable of designing and supplying test stations custom tailored for specific uses as defined by the customer. Test stations usually consist of a body condulet or face plate, a metallic or non-metallic pipe and components such as current measurement shunts, variable resistors, cable lug, etc.

Following are the most common type of test station;

• Single pin test station complete with or without support assembly and conduit
• Three pin test station complete with or without support assembly, current measuring shunt and conduit
• Soil access test station complete with 4” diameter x 350mm long PVC pipe
• Flush fink test station complete with or without 4” diameter x 350mm long PVC pipe and current measuring shunt
• Big fink test station complete with or without 3” diameter x 1524mm (5ft) long PVC pipe and current measuring shunt

To get more information about junction boxes and test stations, kindly contact AFIC sales department.